Gold Clay and Gold paints

3300 Girard NE Albuquerque NM 87107	Art Clay Silver and Precious Metal Clay Check your shopping cart!
	Call to order 1-800-781-2529

Home

Buy Art Clay
Silver

Metal Tools

Gems

Call Now
NMClay

1-800-781-2529

Gold Clay and new Accent Gold for Silver™ Paint Most people use the gold as an accent on smaller silver pieces, combining it with regular silver-clay. Gold can be fired lower, it will not achieve it's full density, but will have nice color. Be sure to fire the new 22k PMC gold correctly, it will melt at 1000C.
Firing	Centigrade	Cone	Fahrenheit	Hold Time	Shrinks
Art Clay Gold 22K	990	06	1814^ºF	1 hour	15%
PMC Gold 22k	700		1290 F	1.5 hours	11%

Check your shopping cart!

Press this button to add this order to your cart

Gold clay from PMC and Art Clay
GOLD-Using PMC Gold--NEW! This 22 karat material is an alloy of 91.7% gold and 8.3% silver, refined into microscopic particles that fuse at relatively low temperatures. This unique combination provides rich yellow color and unusual strength. PMC Gold can be used alone, or as a decorative element on silver items. Consider these possibilities: Co-fire silver and gold PMC side by side Layer silver and gold to make precious metal woodgrain patterns Solder or fuse PMC Gold elements to fabricated and cast items As with silver PMC, you can rehydrate with clean water, and make your own slip from sanding dust. Because Gold PMC has the working properties of PMC3, we suggest that newcomers test ideas in that material. Working with PMC Gold Artists who have used other versions of PMC before will find that the gold is slightly denser. This will make it feel a little stiffer, and explains why it will take longer for water to penetrate. Before using, knead the material while it is still in its plastic wrapping to loosen the structure. Add small amounts of water to compensate for drying during working, but be conservative. Seal unused material to retain moisture. Use wood, plastic, rubber, and steel tools. Finishing is done just like any precious metal, including abrasives, tumbling, hand burnishing, and polishing compounds. PMC Gold can be soldered with any gold solder below 22 karat. Firing PMC Gold As with other metal clays, allow the work to dry, preferably overnight. Drying may be hastened with moderate heat. The recommended firing apparatus is a programmable electric kiln, which provides dependable control. Schedule A: 900º C (1650º F) at least 10 minutes Schedule B: 850º C (1560º F) at least 30 minutes Schedule C: 750º C (1380º F) at least 60 minutes Schedule D: 700º C (1290º F) at least 90 minutes Torch Firing It is also possible to fire PMC Gold with any jewelers torch. Dry completely, set work on a soldering pad, and bring to a red glow. Hold at this temperature for at least two minutes.		3 Grams QTY Price: $251.00 Price subject to change with the gold market.

		10 Grams QTY Price: $831.00 Price subject to change with the gold market.
ACS-GOLD-5 Art Clay Gold 5g Clay 22k INGREDIENTS: 95% of indicated weight is K22 (Gold 91.7%, Silver 8.3 %). After firing: K22 100% FIRING TEMPERATURE / HOLDING TIME: 1814ºF for 60 min. Shrinkage: 15% MELTING POINT: 1931ºF		call for pricing 800-781-2529
Gold accent paints - brush on gold details.
Aura 22—A New Idea in Gold Embellishment Concept Tiny particles of pure gold (91.6%) are blended with 8.4% fine silver particles to create a precious metal with deep yellow color and the ability to fuse to silver at relatively low temperatures. The result is a layer of gold that is considerably thicker than possible with electroplating. Uses: Aura 22 is ideally suited to work with all versions of PMC and metal clay. It can also be used on wrought fine silver and, with care, on sterling that has been properly prepared (see be low). Unlike electroplating, Aura 22 requires no special equipment. Because it can be painted on, Aura 22 offers gestural responses unlike any other gold layering process. It is especially recommended for heavily textured surfaces, and for embellishing areas that would be difficult to cover with alternative techniques. Aura 22 involves almost no waste and a relatively small investment. A one gram package can usually embellish 20-30 objects.		$85.99 for 1 gram jar QTY Click here for full instructions Click here for a new way to fire

24K Accent Gold for Silver™ Paint This product consists of one gram of pure, 24 K gold powder dispersed in a non-toxic water based liquid medium. It is used to apply gold accent layers to fine silver jewelry articles, including those prepared from silver clay. Accent Gold for Silver™ paint is used by applying it with either a brush or a knife tip to a silver piece, drying, and then heating the piece to bond the gold powder to itself and the silver. After cooling, the gold layer is burnished and the desired final finish is applied Click here for full instructions		$78.00 for 1 gram vial QTY
Purple gold is an 18K compound of gold with other metals. Price is per gram. Its color is natural and not the result of any type of coloration, such as dyeing or application of a coating. Purple gold is finding increasing applications in silver clay jewelry as artists explore how to use it to accent their designs. This very unusual material will challenge your artistic imagination and provide you with a distinctive medium with which to set your silver clay jewelry apart from the norm. It can be applied either with organic resins or by embedding it in silver clay pastes that fire at lower temperatures. 1 gram		Purple Gold $ 59.34 QTY
Gold Foil For Kimbu
ACS-GOLD-FOIL Art Clay Gold Foil 2"x1.56" 24k Apply to fired, finished silver and fire to 1472F , then burnish and polish. For Kimbu		$ 14.99 QTY
Gold Keum Boo Foil 3 1/2" Sq Gold Foil 23.5K Larger than the art clay gold foil. But the art clay is cheaper.		$ 97.20QTY

PMC3 ring with 24K Gold Paint Inlay Cross w 24K Paint

Send an E-Mail to Silver-Clay.com © New Mexico Clay 2001-2009 11/23/2009